For highest demands. Powerful and flexible. The FAZ II PLUS is suitable for... more
For highest demands. Powerful and flexible.
The FAZ II PLUS is suitable for prepositioned and push-through installation and is also ideal for standoff installation thanks to the long thread. The FAZ ll PLUS expansion clip enables the highest load bearing capacity, thus fewer fixing points and smaller anchor plates are required. The reduced anchorage depth allows for significantly reduced drill hole depths and thus a noticeably quicker installation. Fewer hammer blows when hammering in the anchor, together with the low torque slippage, ensure a noticeably simple and comfortable setting process
The push-through anchor for fixings with sophisticated design in cracked... more
The push-through anchor for fixings with sophisticated design in cracked concrete
The anchor construction allows for wide-ranging head shapes for fixing points with sophisticated design. The ideal interaction of screw shank and sleeve allows for a high shear load, thus fewer fixing points are required. The international approvals guarantee maximum safety and the best performance. These approvals even cover use in earthquake zones (seismic). The optimized geometry reduces the energy required for installation.
The cost-efficient fixing for flexible use in non-cracked concrete. The FBN II... more
The cost-efficient fixing for flexible use in non-cracked concrete.
The FBN II is suitable for prepositioned and push-through installation; also suitable for stand-off installation under certain conditions. The standard anchorage depth achieves the maximum load-bearing capacities, thus fewer fixing points and smaller anchor plates are required. The reduced anchorage depth reduces the drill hole depth. This minimizes the amount of time needed for installation whilst increasing flexibility.
The push-through anchor for fixings with sophisticated design in cracked... more
The push-through anchor for fixings with sophisticated design in cracked concrete.
The anchor construction allows for wide-ranging head shapes for fixing points with sophisticated design. The ideal interaction of screw shank and sleeve allows for a high shear load, thus fewer fixing points are required. The international approvals guarantee maximum safety and the best performance. These approvals even cover use in earthquake zones (seismic). The optimized geometry reduces the energy required for installation.
The powerful injection mortar for rebar connections and cracked... more
The powerful injection mortar for rebar connections and cracked concrete.
The Superbond resin capsule RSB is approved for cracked and non-cracked concrete and it is especially economical for individual application and overhead installations.The resin capsule RSB is fast curing, enabling an installation without waiting times and approved processing at frosty temperatures of –30°C. The approval for seismic applications, water filled and diamond drilled holes ensures safety under extreme conditions.
The fixing system with internally threaded anchor for non-cracked... more
The fixing system with internally threaded anchor for non-cracked concrete
Often used for removable or temporary fixings, e.g. for machines. The internally threaded anchor RG MI allows for surface flush removal and reuse of the fixing point, and therefore offers the best possible flexibility. The metric internal thread has an ideal adaptation ability, allowing for the use of standard screws or threaded rods to suit the intended purpose.
The proven rod anchor for external use with a mortar cartridge or injection... more
The proven rod anchor for external use with a mortar cartridge or injection mortar.
The fischer rod anchor RG M is produced from stainless steel. The anchor rod is a systems accessory for various fischer mortar cartridges or injection mortars. Application with pre-portioned mortar cartridges is especially cost-effective for individual fixings. During mounting with the resin capsule, set the fischer anchor rod RG M through rotating and hitting motions with a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in external areas.
The injection system is suitable for prepositioned and push-through... more
The injection system is suitable for prepositioned and push-through installation when combined with threaded rod ATR. The mortar is extruded bubble free from the drill hole base and the mortar bonds the entire surface of the threaded rod with the drill hole wall and seals the drill hole. The threaded rod is set manually, by lightly rotating it until it reaches the drill hole base.
The concrete all - rounder. Thanks to its high bond strength, Superbond... more
The concrete all – rounder.
Thanks to its high bond strength, Superbond mortar FIS SB achieves a very high load level for safe use in cracked and non-cracked concrete. The Superbond mortar can even be used at extremely high temperatures of up to +150 °C. This opens up new application fields, where no chemical anchor could be used previously. The Superbond mortar FIS SB is approved for seismic applications, which ensures safety even under extreme conditions.
