Description
FUNCTIONING
1) The SIT® drive (TX compatible) allows for optimum torque transmission, a tight and snug fit, and fast centering.
2) The high efficiency thread with anti-friction coating to reduce drive-in torque.
3) An aggressive drilling tip with wings cuts a clearance hole for timber and through the steel frame.. It allows quick, easy and safe work without pre-drilling for steel thickness: 1.25 – 3.0 mm.
The Delta®-Seal coating gives them a high corrosion and weather resistance, increased fracture torque, and makes them suitable for outdoor use where stainless steel is not required.
NOT suitable for use around pools, close to the waterline and in aggressive environments or areas with extreme UV exposure (for those applications you should consider our stainless 316/bimetal screws).
INSTRUCTIONS FOR USE
Drive in the fastener with high to maximum speed using a cordless drill or electric drill. As soon as you hit the metal substructure, reduce speed and increase the pressure slightly. Make sure you don’t overdrive the fastener by stopping as soon as the screw head is levelled with the surface.
Only to be used with a drill driver (cordless or corded) / DO NOT USE AN IMPACT DRIVER
APPLICATIONS
- Fencing
BUILDING MATERIALS
- Merbau
- Spotted Gum
- Blackbutt
- Tallowwood
- Stringybark
- Karri
- Sydney Bluegum
- Jarrah
- Ironbark
- Tasmanian Oak
- Victorian Ash
- Grey Box
- Oak.
TIP:
Protection: Harsh chemical cleaners for timber may damage the screw surface. Please wash any residue off immediately for longer enjoyment.
Note: DELTA® SEAL coating not suitable for areas that are subject to sea water, salt chlorinated pools, harsh or aggressive environments (including cleaners) or extreme UV exposure. For these applications, please see our 316 stainless steel alternative.
